Printed Circuit Board Prototype
PCB prototyping used to the nightmares of many electronics professionals. Now terminates the nightmares! We can get your first-try boards in 24 hours!
After placing your order, our engineer will audit your Gerber files to make sure it complies with our technical spec. Once the files pass the audit, you can pay the cost online. Also, our engineer will check again and optimize the files to make production.
The prototyping stage is the most critical period for engineers, students, and hobbyists.
Check our PCB manufacturing capabilities in the following table:
| Feature | Capability |
| Min. Line Width | 0.076mm/3mil |
| Min. Hole Size | 0.15mm—1mm |
| Min. Line Spacing | 0.076mm/3mil |
| Copper Thickness | 1oz—13oz |
| Base Material | Aluminum, FR4, Flex, Flex-rigid, HDI, Rogers, etc. |
| Board Thickness | 0.2,0.4, 0.6,0.8,1.0,1.2,1.6,2.0,2.4 mm |
| Surface Finishing | HASL with lead HASL, Lead-free, Immersion gold, OSP, Hard Gold |
| Finsih Cooper | 1-13oz |
| Solder Mask | Green, Red, Yellow, Blue, White, Black, Purple, Matte Black, Matte green |
| Silkscreen | White, Black |
| Testing | Fly Probe Testing (Free) and A.O.I. testing |
| Build time | 24 hours |
| Lead time | 2-3 days |
