We Offer a Wide Range of PCB Capabilities to Fit All of Your PCB needs the information below details some of the key capabilities that IncoPCBA can offer and support today. You will find information here relating to the specific materials we can support, the PCB technologies or product types that we currently produce, as well as some of the tolerances which we can achieve.
The first category is what we call “Quick-turn” which means we can offer Small Quantity – Quick Turn PCBs, Custom Spec – Standard PCBs, and Quick-order PCBs (Gerber Viewer).
The second is our “Advanced” offering and this shows the very best that InvoPCBA can offer: Full Spec PCBs, Highly Specialized Precision PCBs, & Large Scale Production, but sometimes some plates and materials are temporarily out of stock.
“Standard PCB” = Advanced + quick-order
PCB Capabilities – Quick-turn PCB
| Items | Manufacturing Capabilities | Remarks | |
|---|---|---|---|
| Number of Layers | – | 1-10 layers | For orders above 10 layers,please view the below “Standard PCB” or contact our sales rep. |
| Material | – |
FR-4,Aluminum |
For Flex, Rigid-flex, Metal-based (Aluminum etc.,), HDI, Halogen-free, High Tg, etc.,please view the below “Standard PCB” or contact sales rep. |
| Maximum PCB Size(Dimension) | – | 500*1100mm (min 5*6mm) | Any sizes beyond this dimension, please view the below “Standard PCB” or contact sales rep. |
| Board Size Tolerance(Outline) | – | ±0.2mm/±0.5mm | ±0.2mm for CNC routing, and ±0.5mm for V-scoring. |
| Board Thickness | 0.2-2.4mm | 0.2,0.4, 0.6, 0.8, 1.0, 1.2, 1.6, 2.0, 2.4mm. Please view the below “Standard PCB” or contact us if your board exceeds these. | |
| Board Thickness Tolerance(t≥1.0mm) | – | ±10% | Normally “+ Tolerance” will occur due to PCB processing steps such as electroless copper, solder mask and other types of finish on the surface. |
| Board Thickness Tolerance(t<1.0mm) | – | ±0.1mm | |
| Min Trace | 0.1mm/4mil | Min manufacturable trace is 4mil(0.1mm), strongly suggest to design trace above 6mil(0.15mm) to save cost. | |
| Min Spacing | Min manufacturable spacing is 4mil(0.1mm), strongly suggest to design spacing above 6mil(0.15mm) to save cost. | ||
| Outer Layer Copper Thickness | 1oz/2oz/3oz(35μm/70μm/105μm) | Also known as copper weight. 35μm=1oz, 70μm=2oz, 105μm=3oz. Please view the below “Standard PCB” or contact us if you need copper weight greater than 3oz. | |
| Inner Layer Copper Thickness | 1oz/1.5oz(35μm/50μm) | Inner copper weight as per customer’s request for 4 and 6 layers(Multi-layer laminated structure). Please contact us if you need copper weight greater than 1.5oz. | |
| Drill Sizes (CNC) | 0.2-6.3mm | Min drill size is 0.2mm, max drill is 6.3mm. Any holes greater than 6.3mm or smaller than 0.3mm will be subject to extra charges. | |
| Min Width of Annular Ring | 0.15mm(6mil) | For pads with vias in the middle, Min width for Annular Ring is 0.15mm(6mil). | |
| Finished Hole Diameter (CNC) | 0.2mm-6.2mm | The finished hole diameter will be smaller than size of drill bits because of copper plating in the hole barrels | |
| Finished Hole Size Tolerance(CNC) | – | ±0.08mm | For example, if the drill size is 0.6mm, the finished hole diameter ranges from 0.52mm to 0.68mm will be considered acceptable. |
| Solder Mask | LPI | Liquid Photo-Imageable is the mostly adopted. Thermosetting Ink is used in the inexpensive paper-based boards. | |
| Minimum Character Width(Legend) | 0.15mm | Characters of less than 0.15mm wide will be too narrow to be identifiable. | |
| Minimum Character Height (Legend) | – | 0.8mm | Characters of less than 0.8mm high will be too small to be recognizable. |
| Character Width to Height Ratio (Legend) | – | 1:5 | In PCB silkscreen legends processing, 1:5 is the most suitable ratio |
| Minimum Diameter of Plated Half Holes | – | 0.6mm | Design Half-Holes greater than 0.6mm to ensure better connection between boards. |
| Surface Finishing | HASL with lead HASL lead free Immersion gold,OSP |
The most popular three types of PCB surface finish. Please view the below “Standard PCB” or contact us for other finishes. | |
| Solder Mask | Green ,Red, Yellow, Blue, White ,Black |
No extra charge (Green, Red, Yellow, Blue) |
|
| Silkscreen | White, Black, None |
No extra charge. |
|
| Panelization | V-scoring, Tab-routing, Tab-routing with Perforation (Stamp Holes) |
Leave min clearance of 1.6mm between boards for break-routing. For V-score panelization, set the space between boards to be zero. |
|
| Others | – | Fly Probe Testing (Free) and A.O.I. testing(free), ISO 9001:2008 ,UL Certificate |
No extra charge. |
